Panasonic kondicionieri un siltumsūkņi. Oficiālais izplatītājs un sertificēts servisa centrs Latvijā no 1998.gada ! Salons Rīgā ,Straupes ielā 3. Tālrunis +371 67310 975 RIKON    ANNO 1991

Profesinal AirConditioniers

Newly designed next generation Commercial range


Seasonal Efficiency (SCOP)
Product follows the new Ecodesign requirements.
PACi Standard
  • Use of an energy-saving design has resulted in a high COP value.
  • Use of highly efficient R410A refrigerant reduces CO2 emission and lowers operating costs.
  • Good balance, system cost vs energy efficiency
  • Top class SEER/SCOP as a Standard Inverter category SEER: A++ / SCOP: A+ at 10.0 kW (in Cassette 90x90)
  • Interchangeable controller with ECOi
  • Compact outdoor units
  • Twin connection possible
PACi Elite
  • DC Inverter can attain both comfort and energy-saving operation.
  • Meeting all necessary safety approvals to ensure quality and safety
  • Top-class SEER: A++ / SCOP: A+ at 10.0 kW (in Cassette 90x90 and Ceiling)
  • Cooling operation is possible when outdoor temperature as high as 46 °C
  • DC inverter technology combined with R410A for excellent efficiency
  • Cooling operation is possible when outdoor temperature as low as -15 °C
  • Heating operation is possible when outdoor temperature as low as -20 °C
  • Compact outdoor units
  • Auto restart from outdoor unit
  • Twin, Triple and Double-Twin connection possible
Product Quality and Safety

All Panasonic air conditioners undergo strict quality and safety tests before sale. This rigorous process includes obtaining all necessary safety approvals, to ensure that all air conditioners we sell are not only built to the highest market standards, but are also completely safe.

Increased piping length for greater design flexibility
Adaptable to various building types and sizes.
Maximum piping length for PACi Standard: 50 m (from 6.0 to 12.5 kW), 75 m (for 14.0 kW).
Maximum piping length for PACi Elite: 40 m (for 5.0 kW), 50 m (for 6.0 and 7.1 kW), 75 m (from 10.0 to 14.0 kW).

Compact and lightweight
As the unit only weighs 98* kg, it is easy to carry and easy to install.
* For PACi Standard 14.0 kW and PACi Elite from 10.0 to 14.0 kW.

Quiet mode
5 dB can be reduced by setting. External input signal is also available.

Compact & flexible-design
The slim and lightweight design means the PACi outdoor unit can be installed in a number of compact situations.

Energy saving concept
The use of energy saving designs for the structure of fans, fan motors, compressors and heat exchanges has resulted in a high COP value, ranked as one of the top classed in the industry. In addition, use of highly efficient R410A refrigerant reduces CO2 emission and lowers operating costs.
1. Compact & Highly Efficient Compressor. Large-capacity inverter compressor has been adopted. The inverter compressor is superior in performance with improved partial-load capacity.
2. Printed Circuit Board (P-LINK). To improve maintenance, the number of PCBs have been reduced to two.
3. DC fan motor. Considering load and outside temperature, the DC motor is controlled for optimum air volume.
4. New Large Diagonal (520 mm) Air Flow Fan. The fan has been designed to reduce air turbulence and increase efficiency. As fan diameter has been increased to 520 mm, the air volume has been increased by 12% whilst maintaining a low sound level.
5. High-Efficiency Heat Exchanger. The heat exchanger size and the copper tube sizes in the heat exchanger have been redesigned to increase efficiency.
Wide operating range
  • Cooling operation is possible when outdoor temperature as low as -15 °C
  • Cooling operation is possible when outdoor temperature as high as 46 °C
  • Heating operation is possible when outdoor temperature as low as -20 °C
The remote control temperature setting offers a range from 18 °C to 30 °C.

Cooling: -15 °C DB / 46 °C DB
Heating: -20 °C WB / 24 °C WB

Improved energy saving
Operating efficiency has been improved using highly efficient R410A refrigerant, new DC inverter compressor, new DC motor and a new heat exchanger design.

New model in cooling mode
Current model in cooling mode

New model in heating mode
Current model in heating mode

PACi Standard and Elite: indoor units

4-Way 60x60 Cassette

Lighter and slimmer, easier installation
Lightweight and very slim which makes installation possible even in narrow ceilings.
A drain height of approx. 850 mm from the ceiling surface
The drain height can be increased by approx. 350 mm over the conventional value by using a high-lift drain pump, and long horizontal piping is possible.
Significant reduction of power consumption by using highly developed DC fan motors with variable speed, special heat exchangers, etc.
Convenient cleaning. The flap can be removed easily for washing.
Wall Mounted
The unit’s compact design and flat face ensure discreet installation, even in a small space. 

Washable front panel.
The indoor unit’s front panel can be easily removed and washed for trouble-free cleaning.
Closed discharge port
When the unit is turned off, the flap closes completely to prevent dust getting into the unit and to keep the equipment clean. 
Quiet operation
These units are among the quietest in the industry, making them ideal for hotels and hospitals.
Smooth and durable design
The sleek, compact design ensures a discreet installation - even where space is limited.
Piping outlet in three directions
With three options for pipe outlets - rear, right and left - installation is made easy. 
Air distribution is altered depending on the operational mode of the unit. 

Heating: F1 to F5
Cooling: F1 to F3
Low Static Pressure Hide Away (PN Type)
Ultra-slim profile: 250 mm height for all models. 

Discharge air temperature control 
  • Possible to reduce cold drafts at heating operation. 

Cold Drafts Reduction at Heating
  • Accurate temperature measurement by E1/E2 sensor to reduce cold drafts at heating.
Before spec-in, please consult with an authorized Panasonic dealer.

System Example
An inspection port (450 mm x 450 mm or more) is required at the control-box side of the indoor unit body. 

A: 250 mm 
B: Air intake sensor
C: E2 sensor
D: E1 sensor 
E: Rectangle duct
F: Canvas duct
G: Inspection port (450 x 450 mm or more)
H: Intake grille
Further comfort improvement
The wide air discharge opening expands the air flow to the left and the right.
The unpleasant feeling caused when the air flow directly hits the human body is prevented by the “Draft prevention position”, which changes the swing width, so that the degree of comfort is increased.

Further comfort improvement with airflow distribution

Air distribution is altered depending on the operational mode of the unit 

Heating: F1 to F5
Cooling: F1 to F3

High Static Pressure Hide Away (PF Type) 
The static pressure outside the unit can be increased up to 150 Pa.

Type: 60 kW Standard: 70 Pa / 71 kW Standard: 70 Pa / 100 kW Standard: 100 Pa / 125 kW Standard: 100 Pa / 140 kW Standard: 100 Pa Type: 60 kW Max. available setting: 150 Pa / 71 kW Max. available setting: 150 Pa / 100 kW Max. available setting: 150 Pa / 125 kW Max. available setting: 150 Pa / 140 kW Max. available setting: 150 Pa 

More powerful drain pump
Using a high-lift drain pump, drain piping can be elevated up to 785 mm from the base of the unit.

Air inlet
The unit features air inlet on one side, air outlet on the other side. The air inlet filter can be pulled out from the side of the unit and can be folded. Easy access if through the maintenance opening.
When air inlet duct (field supplied) is connected on suction side, remove the filter, frame and insulation materials on both sides of the unit. Connect the duct on the suction side of the unit by using prepared holes on the unit.

Air outlet site
A rectangular duct flange for the air outlet is fitted as standard. Round outlet flange kits are available as an optional accessory kit.

Circle duct flange (option)
CZ-56DAF2 (2 SA outlet): 2 exits x Ø 200 mm
CZ-90DAF2 (3 SA outlet): 3 exits x Ø 200 mm
CZ-160DAF2 (4 SA outlet): 4 exits x Ø 200 mm

A: Standardized height of 290 mm for all models Height standardization enables easy and uniform installation for models with different capacities.
B: Built-in Drain pump (DC motor pump)
C: External electrical equipment box makes maintenance easy P-link PCB
D: - Built-in filter - Side removable filter

E: Standard. Round flange : CZ-160DAF2 ϕ200 outlet frange x 4 ports

Panasonic increase efficiency by 28% and increase the comfort

Easy to use, attractive, clear design, with new demand control functions and energy consumption display! This useful feature makes this remote control unique!
The new CZ-RTC3 wired remote control is ideal for integration into the most demanding interior architectures.
The touch panel  features a very sleek and easy to use display, which with its compact display is only 120mm x 120mm x 16mm.

Display of information
The information is mainly based on pictograms to ensure easy understanding.
The minimal amount of text is available in 4 languages (English / German / French / Spanish / Italian).
The screen is back lit to enable reading even during the night.
Easy Access to the menus
With the new pictograms, the navigation, the selection and the settings are simple and easy to follow.

Key Functions
  • Easy setup of the timer and settings of the indoor unit
  • Energy consumption display (only available with PACi units with the reference ending with A)
  • Limitation of the energy consumption (Demand control) by timer
New Econavi Sensor
The all new Econavi Sensor detects presence in the room, and quietly adapts the PACi or VRF air conditioning system in order to improve comfort and maximise energy savings.
  • Detects human activity and adjusts temperature by 2 degrees (up or down) to optimize comfort and efficiency
  • If there is no activity detected for a set time, the Econavi will stop the unit or move to a new temperature previously set
  • The Econavi device is installed independently of the indoor unit, and is located in the area best suited for detection
Saving Energy for Offices: if the air conditioning is left on after the last employee leaves the office, Econavi will automatically react, reducing or stopping the system.
Increased comfort in hotel rooms: when presence is detected in the room, the temperature is automatically adjusted to achieve best comfort.

Econavi function
  • Analyses room activity: Human activities and human heat
  • Modifies the capacity to adapt in real-time to the needs of the room
Key points
· Compatible with Cassette, Wall Mounted, Hide Away and Ceiling · Sensor · Improves efficiency · Better Comfort · Can be installed in the best place of the room for detection purposes.
Available in October 2014.
Human activity and presence detection
Activity detection
Cooling Set Temp. +/-0°C
Heating Set Temp. -1°C

Cooling Set Temp. +1°C
Heating Set Temp. +/-0 °C
Each 2 min
Presence detection
After 20 mins absence: Cooling Set Temp. +2°C / Heating Set Temp. -2°C
After 3 hours absence: Cooling Thermo OFF / Heating Thermo OFF
After 3 hours set up can be change to stop or temp shift
Sensor location image

1. Detection area 6m / 2. Approx 1m / 3. 1,8m Dead Zone / 4. Human detection area (2,5m height angle 30°)

Panasonic AHU Kit, 10-25 kW connected to PACi outdoor unit

The new Air Handling Unit Kit has been developed to better meet customer demand:
  • IP 65 Box in order to be installed outside
  • 0-10V demand control (included on the CZ-CABP2 PCB)*
  • Easy control by BMS
* Only available with Elite PACi, up to from 6kW to 14kW.
1. Air Handling Unit Kit PAW-280PAH2 / 2. Controller wiring CZ-RTC2 (Optional) / 3. I/D-O/D wiring / 4. Wiring for Thermostat & Solenoid Valve / 5. Piping / 6. PACi / 7. Air Handling Unit


Panasonic has developed an innovative line up of remote controls specially designed for applications

Nº1 for hotel applications. All in one!
More easier to install, cheaper to integrate one only control to integrate all devices
  • Easy to install
  • Cost effective installation as all electrical cable are centralized on this remote
  • Architect inspired attractive design
  • Direct connection to the Indoor unit with most of the functions of the indoor unit
  • 3 options available: Stand-Alone, Modbus or LonWorks communication
  • 2 frame colours: White and aluminium

From this remote control
The lighting, card contact, motion detector, window contact and the air conditioning are controlled.
Energy saving functions included on the device
  • Turns Off air conditioning and lighting when room is unoccupied
  • Disables air conditioning when window is open
  • Maximum/minimum setpoint temperature configurable

Easy remote control
The hotel customer will have access to limited functions to control the air conditioning:  ON/OFF, Temperature (under a certain limit fixed during the start up) and Fan speed

Easy set up
Stand-Alone model with easy configuration menu to access all parameters. The installation is simplified as all the cables should arrive to the remote control. A pre-define scenario can be uploaded on the remote control connected to a computer to make installation on site plug and play (only on the Modbus and LonWorks models).
Control to integrate all room hotel needs in one device
Card switch. Heating and cooling control. Light control. Window control. Possible to connect to Modbus.

1. Indoor unit. Variable static pressure hide away
2. Room card switch*
3. Lighting control
4. Human sensor
5. Window contact*
* Field supply

Why R22 renewal?

An important drive to further reduce the potential damage to our ozone
It is often said that legislation is ruling our lives but sometimes it is there to help save lives. R22 phase out can be described as one of these and from Jan 1st 2010 the use of Virgin (new) R22 refrigerant was banned within the European Community.

Panasonic are doing our part
We at Panasonic are also doing our part – recognising that all finances are under pressure at the moment. Panasonic has developed a clean and cost effective solution to enable this latest legislation to be introduced with as minimum an effect on businesses and cash reserves as possible.
The Panasonic renewal system allows good quality existing R22 pipe work to be re-used whilst installing new high efficiency R410A systems.

By bringing a simple solution to the problem Panasonic can renew all Split Systems and PACi systems; and depending upon certain restrictions we don’t even limit the manufacturer’s equipment we are replacing. 

By installing a new high efficiency Panasonic R410A system you can benefit from around 30% running cost saving compared to the R22 system. The installation can also qualify for the government’s ECA (Enhanced Capital Allowance Scheme) which enables you to offset the cost against your Capital Gains Tax.

1. Check the capacity of the system you wish to replace
2. Select from the Panasonic range the best system to replace it with
3. Follow the procedure detailed in the brochure and technical data Simple...

R22 - The reduction of Chlorine critical for a cleaner future
Reuse of existing piping (Renewal Design & Installation)
Notes on Reuse of Existing Refrigerant Piping
It is possible for each series of PE1 type and PEY1 type outdoor unit to reuse the existing refrigerant piping without cleaning when obtained a certain condition. Make sure that the requirements under the section “Notes on Reuse of Existing Refrigerant Piping”, “Measurement Procedure for Renewal” and “Refrigerant Piping Size and Allowable Piping Length” will be satisfied in order to carry out . Also, check the items with regard to section “Safety” and “Cleaning”. 
1. Prerequisite
  • If the refrigerant used for the existing unit is other than R22, R407C and R410A, the existing refrigerant piping cannot be used.
  • If the existing unit has another use than air conditioning, then existing refrigerant piping cannot be used.
2. Safety
  • If there is a hollow, crack or corrosion on the piping, make sure to install new piping.
  • If the existing piping is other than capable of reuse of piping as shown in the flowchart, make sure to install new piping.
  • In case of multiple operation type, use our genuine branch piping for refrigerant R410A. 
A local supplier shall assume responsibility for the defects and hollows on the reuse of existing piping surface and recognition of reliability of the piping strength. There is no guarantee that we take responsibility for such damages. The operational pressure of the refrigerant R410A becomes higher compared to R22. In the worst case, a lack of compressive strength may lead to piping explosion.

3. Cleaning
  • When the refrigerant oil used for the existing unit is other than the listed below, make sure to install new piping or wash it thoroughly before reusing it.
    [Mineral Oil] SUNISO, FIORE S, MS
    [Synthesized oil] alkyl benzene oil (HAB, parallel freeze), ester oil, ether oil (PVE only) 
If the existing unit is GHP type, it is necessary to wash the piping thoroughly.
  • If the existing pipes in the outdoor and indoor units remain disconnected, make sure to install a new piping or wash it thoroughly before reusing it.
  • If the discolored oil or residue remains in the existing piping, make sure to install a new piping or wash it thoroughly before reusing it. See “Deterioration Criteria for Refrigerant Oil” in table 3.
  • If the compressor of the existing air conditioner has a failure history, make sure to install a new piping or wash it through thoroughly before reusing it. 
When reusing the existing piping as it is without removing dirt and dust, inadequate piping could result a renewal appliance in failure.
Notes on Renewal for Simultaneous Operation of Multiple Units
Only main pipe is applicable for using the different diameter size. In case of different diameter size for the branch pipes, a new installation work for a standard size is necessary. Be sure to use our genuine branch piping for refrigerant R410A.
  • Only the main pipe L can be used among different diameter’s existing piping.
  • Installation work as a standard size is capable for L1, L2, ℓ1 - ℓ4 piping.
  • Be sure to use our genuine branch piping for refrigerant R410A. 
1. In case of single unit
It is not necessary to charge with additional refrigerant until the charge less pipe length in the table 2.
If the pipe length is exceeding the charge less pipe length, charge with additional refrigerant amount per 1 m according to the equivalent length.

2. In case of simultaneous operation of multiple units
Calculate the refrigerant charging amount according to the calculating method of the standard piping diameter.
As to the additional refrigerant charging amount per 1 m, refer to the additional amount in the table 2.

Notes on Renewal for Simultaneous Operation of Multiple Units
Capacity class (Standard piping size):
  • Type 50: Ø6.35 Liquid pipe / Ø12.7 Gas pipe 
  • Type from 60 to 140: Ø9.52 Liquid pipe / Ø15.88 Gas pipe 
  • Type 200: Ø9.52 Liquid pipe / Ø25.4 Gas pipe 
  • Type 250: Ø12.7 Liquid pipe / Ø25.4 Gas pipe

A: Main pipe
B: Branch pipe
Measurement Procedure for Renewal
Observe the following procedure when reusing the existing piping or carrying out renewal installation work. Flowchart of Existing Piping Measures Criteria for PE1 Type and PEY1 Type Outdoor Unit

Opposite side dimension of flare nut (mm)
Piping size: Ø6.35. For R410A: 22. For R22/R407C: 22.
Piping size: Ø9.52. For R410A: 22. For R22/R407C: 22.
Piping size: Ø12.7. For R410A: 26. For R22/R407C: 24.
Piping size: Ø15.88. For R410A: 29. For R22/R407C: 27.
Piping size: Ø19.05. For R410A: 36. For R22/R407C: 36.
Table 1 Reusable existing piping (mm)
Refrigerant Piping Size and Allowable Piping Length
Check if reuse of existing refrigerant piping is possible based on the following chart. The standards other than this one (difference of elevation, etc.) are identical to the requirements of ordinary refrigerant piping.

Table 2 - 1 Refrigerant piping size: 3.6 - 14.0 kW type (mm)
How to see table definition (example):
In case of type 71, standard size is liquid pipe Ø9.52 / gas pipe Ø15.88.
There is a limitation to liquid pipe Ø9.52 / gas pipe Ø12.7and to liquid pipe Ø12.7 / gas pipe Ø15.88.
However, they are applicable for different diameter’s pipes.

Table 2 - 2 Refrigerant piping size: 20.0 - 25.0 kW type (mm)
Table 3 Deterioration Criteria for Refrigerant Oil
Renewal / Replacement Technology 
  •  Test should also be carried out to ensure the oil within the system is not acidic.
  • Most kinds of test kit are acceptable including suction line tests.
  • If the system has had a history of burnouts it is more than likely the system will not be a good candidate for a renewal/replacement technology.

Panasonic Air Conditioniers

Panasonic – leading the way in Heating & Cooling

With more than 30 years of experience, selling to more than 120 countries around the world, Panasonic is unquestionably one of the leaders in the heating and cooling sector.
With a diverse network of production and R&D facilities, Panasonic delivers innovative products incorporating cutting-edge technologies that set the standard for air conditioners worldwide.
Expanding globally, Panasonic provides superior international products transcending borders.


100% Panasonic: we control the process

The company is also a world leader in innovation as it has filed more than 91,539 patents to improve its customers’ lives. Moreover, Panasonic is determined to remain at the forefront of its market. In all, the company has produced more than 200 million compressors and its products are
manufactured in 294 plants which are located all over the world. You can be assured of the extremely high quality of Panasonic’s heat pumps.This wish to excel has made Panasonic the international leader in heating and turn-key air conditioning solutions for homes, medium-sized buildings
such as offices and restaurants, and large-scale buildings. These offer maximum effectiveness, comply with the strictest environmental standards and meet the most avant-garde construction requirements of our time.At Panasonic we know what a great responsibility it is to install heating
and cooling systems. Because offering you the best solutions in heating and cooling matters

Panasonic Europe announces Sustainability Declaration

Panasonic establishes new targets for the business’ environmental performance and CSR initiatives
Best Global Green Brand 2013

We were recently awarded Interbrand’s 4th Best Global Green Brand 2013 – the highest of any consumer electronics brands. This is the result of our commitment to energy efficient products, reduction in CO2 emissions, kids school ‘eco learning’ programme and much more.
Sustainability Declaration. Berlin, Germany, 4th September 2013
Panasonic Europe announces today its new Sustainability Declaration for Europe and CIS, extending its current initiatives to ensure all business activities lead to a more sustainable society.The Sustainability Declaration unites Panasonic’s new brand direction towards ‘A Better Life, A Better World’ with a series of
environment and CSR initiatives contributing to the progress and development of society. Recognising the impact on the environment and society through its products and practices, Panasonic aims to deliver on specified targets by March 2016. The European Sustainability Declaration is in accordance with Panasonic’s Global Sustainability Policy, which has been rolled out globally in recent weeks.


History of Air Conditioniers Group




SIA"RIKON AC' ir oficiāls Panasonic kondicionieru izplatītājs Baltijas valstīs.


1998.gadā Latvijā tika atvērts specializēts Panasonic kondicionieru servisa centrs .
Servisa centra galvenais uzdevums ir garantijas un pēcgarantijas servisa nodrošināšana visā Latvijas teritorijā !
15 gadu laikā Latvijā tika izveidots dileru un servisa centru tīkls.
Pateicoties tam Panasonic var nordošināt saviem klientiem augstākā līmeņa Panasonic kondicionieru servisu visā Latvijas teritorijā.

Klienta rīcībā ir sekojošās priekšrocības:

1. Speciālista bezmaksas vizīte klienta objektā, izvēlētā laikā (visā Latvijas teritorijā).
2. Kondicioniešanas sistēmas projekta un tāmes bezmaksas izstrādāšana vienas darba dienas laikā;
3. Visi Panasonic kondicionieri tiek piedāvāti tikai kopā ar uzstādīšu (kuru veic sertificēti meistari ar daudzgadīgu
    Panasonic kondicionieru uzstādīšanas un apkalpošanas pieredzi). Lai nepieļautu nekvalitatīvas uzstādīšanas iespēju!
4. Visi Panasonic kondicionieri tiek nodrošināti ar 5 GADU GARANTIJU visā Latvijā!
5. Panasonic kondicionieriem tiek veikta ikgadējā gatantijas un pēcgarantijas apkalpošana ;
6. Nepieciešamības gadījumā tiek veikts pēcgarantijas remonts.

Pateicoties šādai pieejai, Panasonic kondicionieri ieņem vienu no vadošajām vietām Latvijas kondicionieru tirgū. Piecpacmit gadu laikā mēs kopā ar mūsu dileriem esam pārdevuši ar uzstādīšanu vairāk par 6000 Panasonic kondicionieru. Katram kondicioniera patenciālam klientam tiek piedāvāti vairāki tehniskie risinājumi dažādās cenu kategorijās, no budžeta līdz ekskluzīviem risinājumiem.
Arī šodien praktiski visi Panasonic kondicionieri ir darba kārtībā pateicoties tam, ka šie kondicionieri ir kvlitatīvi uzstādīti un šiem kondicionieriem tika veiktas ikgadējās tehniskās apkopes.

Rezultātā jau 12 gadus Latvijā Panasonic kondicionieri tiek pārdoti ar 5 gadu garantiju, tāpat kā pārējās Eiropas valstīs.


Ar prieku gribam minēt Jums dažus no mūsu klientiem:

• Amaija (bērnu preču veikals)
• AL-KO Kober
• ARD Eoltas (autodetaļu vairumtirgotājs-biroja ēka)
• 636 (datorveikals+birojs)
• A komanda (mērnieku birojs)
• AJKC klīnika (Lukina acu klīnika +birojs)
• AKA 3 (biroju ēka)
• ADM Baltic tranzīts (muitas noliktava)
• Ave Lat sargs (apsardzes firmas biroja ēka)
• AKKA/LAA (Latvijas autortiesību uzraudzības aģentūras birojs)
• Asinine (biroju ēka)
• Augstceltne
• Artima (birojs un apavu veikalu tīkls)
• Augļu serviss (biroju ēka)
• Autoceļu kvalitātes izpētes labaratorija (labaratorijas un birojs)+profesionālā ventilācija
• Balt Vest (vairumtirdzniecība birojs)
• Baltic Gaisma (biroju ēka)
• Baltā Bura (biroju ēka)
• Bauskas siltums (biroja ēka)
• BBS( interneta veikals,birojs)
• Beļģijas vēstniecība (servertelpa)
• Begonija (tūrfirmas birojs)
• Belam Rīga (Telekomunikāciju firma,biroju ēka)
• Bērnu klīniskā universitātes slimnīca (neiroķirurģijas operācijas zāle)+profesionālā ventilācija
• Beng Olufsen salonveikals (Hi End audio/video salonveikals+biroja ēka)
• Biznesa drošība
• Bliks (spēļu zāles Aladins)
• BTA (Apdrošināšanas kiosks)
• Baltijas Realizācijas Centrs (Autosalons)
• Burusports (sporta ekipējuma veikali)
• Centrālā laboratorija (labaratoriju tīkls visā Rīgā )
• Cable engineering (Elektro materiālu tirgotājs,birojs)
• Centrālā reģiona ceļi (Ceļu uzturētājs,birojs)
• Centrālā reģiona ceļi (Aizkraukles ceļu rajons)
• Columbia Shipmanagement (Jūrnieku atlases aģentūra)
• Cramo (tehnikas noma,filiāles Rīgā))
• Četri balti krekli (nakts klubs)
• DSV (Skandināvu transporta firma,biroja ēka) Datagrupa Duets -96(pārtikas veikalu tīkls)
• ECCO Baltija (Ecco apavu pārstāvniecības birojs) Engures pagasta padome
• Eiroskor Latvija (apavu veikalu tīkls visā Latvijā,birojs)+ventilācija
• Ekspertu centrs
• Elektronikaserviss (sadzīves tehnikas servisa centrs-servertelpa)
• EVA (biroju ēka)
• ELBI augļu vairutirdzniecība (biroju ēka)
• Elfa Elektronika
• Elīza-K(birojs)
• Energolukss
• Eiro Trans Logistic
• Emeralda (dārglietu veikali)
• Esma (makšķernieku preces)
• Falck apsargs (apsardzes firmas biroju ēka)
• Furors (spēļu zāles Klondaika)
• Gatske Latvian Textile (tekstlrūpnīcas birojs)
• Gretabalt
• Ģimenes centrs Kanieru ielā (operācijas zāle)+ventilācija
• Gaiļezera slimnīca
• Inter info (uzziņu dienests 1188,birojs)
• Irijas vēstniecība (servertelpa)
• KL shiping (biroju telpas)
• Komercceltnieks
• Krievijas Federācijas vēstniecība
• Krievijas Iekšlietu min.migrācijas lietu depertaments
• Kuldīgas pilsētas Dome
• Jahonts (juvelierizstrādājumi ,birojs)
• Juglas nomi (servertelpas)
• Junik (interneta provaiders-servertelpa)
• LAS-1(birojs)
• Latvijas Amerikas acu centrs (operāciju zāles un kabineti)
• Latvijas autoceļu uzturētājs (birojs)
• Latvijas kuģniecība (birojs)
• Latvijas flnieris
• Latvijas Jūras administrācija
• Latvijas olimpiskā komiteja (birojs)
• Latvijas Olimpiskais centrs Grostonas ielā (birojs)
• Latvijas plastiskās rokas un mikroķirurģijas centrs (operāciju zāles)
• LPG (Latvijas propāna gāzes birojs)
• Latvijas Republikas Vides ministrija
  Latvijas Republikas Ģenerālprokuratūra
• Latvijas Jūras medicīnas centrs
• Latvijas Naturalizācijas pārvalde (servertelpa)
• Laimtūre (birojs)
• Latvijas Universitāte
• LR Bērnu un ģimenes lietu ministrija (biroju telpas ,servertelpa)
• Latvijas valsts ceļi (birojs)
• LDZ (serveri, stacijas, biroji), LDZ Cargo
• Liepavoti (birojs)
• Liepiņš (benzīntanku tīkls Latvijā)
• Lorta klasika (frizētavu tīkls Rīgā)
• LR Drošības Policija (servertelpas,birojs)
• LR Iekšlietu ministrija LR Valsts zemes dienests
• LR Prezidenta kanceleja (galvenā servertelpa)
• LUBMC (Latvijas universitātes biomedicīnas centrs)
• Latvijas Muita (birojs ostā)
• Latvijas Ģeoloģijas un meteoroloģijas aģentūra (servertelpas un biroji)
• Miele (ekskluzīvā sadzīves tehnika-salons un birojs)
• Mani Nami
• Mārupes metāmeistes (ražotnes, birojs)
• Magnum medical (birojs)
• Metālprofils
• Mions Pro (birojs)
• Multibanka
• Mobil Asfalt (asfalta rūpnīcas birojs)
• Mono (servertelpas)
• Nacionālais kinocentrs
• Neatliekamās palīdzības vadības centrs (birojs)
• Neste Latvija (Centrālās krātuves birojs+servertelpa)
• Nordic
• Olainfarm (birojs)
• Olaines kultūras un sporta centrs
• Orions celtniecības firma (birojs)
• Ozolciems tūre (birojs)
• Panarāma plaza (Penthause VIP dzīvoklis 400m2,26 stāvs)
• Parex bankas jaunā ēka (UPS telpa 36 kW)
• Parex banka (filiāle Sarkandaugava)+ventilācija
• Parex banka (filiāle Vecmilgrāvis)+ventilācija
• Parex banka (filiāle Teika)+ventilācija
• Parex banka (filiāle Gulbene)+ventilācija
• Parex banka (filiāle Salacgrīva)+ventilācija
• Parex banka (filiāle Limbaži)
• Parex banka (Valdemāra, Kalpaka, Laimdotas, Smilšu, Brīvības ielās)
• Parex banka Smilšu 3(servertelpas,kabineti).
• Privatbanka centrālais birojs (biroja ēka+ galvenais serveris 55kW)
• Privātbanka filiāle Merķeļa ielā
• Privātbanka filiāle Vecmilgrāvī
• Privātbanka filiāle Ventspilī (birojs +servertelpa)
• Pētermāja (biroju ēka)
• Polijas vēstniecība (vēstnieka kabinets)
• Polipaks (politilēna ražotne,birojs,režotne,servertelpa)
• Pristis (apsardzes firma)
• Pharma Swiss Latvija
• Rade grua
• Radiostacija MixFM
• Radiostacija StārFM
• Radiostacija PIK
• Revers (birojs)
• RCPF (birojs)
• Rīgas Domes informāciju tehnoloģiju centrs(servertelpas)
• RRA (Rīgas vagonrūpnīca)
• Reuters Latvija (ziņu aģentūra, servertelpa)
• Rīgas gaisma (biroju telpas)
• RSEBA (mācību korpusi,auditorijas,kabineti,servertelpas)
• Siltumelektroprojekts
• Skandi motors (birojs)
• Silvanols (zāļu ražotne)
• Sociālo Tehnoloģiju Augstskola
• Stiliks (birojs)
• Talsu Vēstis
• TNT Express (birojs) Teikas Nami Terabalt (Lieājas ostas termināls)
• Unifex (servertelpas)
• Uzturlīdzekļu garantijas fonda administrācija (birojs)
• Unistock (biroju telpas)
• Valis (zobārstniecības klīnika) Valsts zemes dienests
• Velux Latvija (birojs)
• Venden (biroju ēka)
• Via Una poliklīnika (labaratorijas,kabineti)
• Viesnīca "Radi un Draugi"2;3,4,5,6,7 stāvi (FS Multi VRF),kopumā vairāk kā 80 iekšējo bloku. 
• VIA-S (moduļu mājas)
• VSAA (filiāles visā Latvijā)
• Vīlandes doktorāts
• Weight Watchers Latvia (svara vērotāji,biroja telpas)
• Wrigley Scandinavia AB pārstāvniecība (biroju telpas)
• YOTA (biroju telpas ,servertelpa)
• Zviedru nams (biroju telpas)

Vēl vairāk kā 4000 klientu (biroji, veikali, kafejnīcas un privātpersonas)


Panasonic Värmepumpar, Panasonic flagship HE9PKE , Panasonic Etherea NE9PKE , Panasonic Inverer CE9PKE


Copyright © 1998-2014 "RIKON AC"